|
Discontinued
The Alexis X50 HHO Booster Kit is a powerful and impressive combination of American design and ingenuity. So you want the best design and
the best value? Here is the water car kit you have been looking for. You have researched a lot about electrolytic injection, and you may look still keep looking, but bookmark this page and come back when you are ready for the perfect design, the best kit, and the smartest hydrogen injection system you can find. Because you
will find that other competive units in this price range have much less volume output, are built in someone's garage, and don't come with all of the pieces you need to complete your
project. The hydroxy kit you see below has the ultimate in electronic control circuitry that no one else has. Other companies may make their own hydroxy kit and bundle it
with an EFIE from a third party. Not here. The Alexis HHO Booster Kit by HTC is designed and assembled by the leader in water for fuel
electrolysis units (the hardware) and vehicle management units (the software), Hydroxy Technologies Corporation (HTC). This is the conclusion of your search for the best in fuel-saving devices for your car or truck!
The Alexis HHO Booster Kit works on Electronic Fuel Injected (EFI) and Carbureted vehicles with engine size from 1.2 L to 5.0 L. Works with both Gasoline and Diesel engines,
including boats, motorhomes, heavy machinery, farm tractors, and other equipment.
Scroll down to Add To Cart
- Alexis Cell V3 HHO Generator, 132 lph typical, 180 lph maximum output. Dimensions: 2.75 x 2.75 x 10 inches*** (70 mm x 70 mm by 250 mm)
- Bubbler, 2.5 x 2.75 x 10 inches** (65 mm x 70 mm x 250 mm)
- Vehicle Management Unit (VMU Series 2) for gas or diesel
- The Industry's only microprocessor-controlled VMU replaces a simple EFIE with an LCD, remote control, and an intelligent interface (see below for some actual screen shots)
- What is a VMU? See the VMU webpage for more
information on this EFIE/computer
- Screen: Full Color 2.5 in. LCD for dash mounting
- Master Power Box, rated at 30 A
- VMU wiring Kit (with connectors)
- Optional modules** for the Series 2 VMU include: GPS, OBD-II, Solid State Current Sampling
- Flashback arrester rated at 180 liters per hour
- Current requirement: Approximately 21 amps at full power (adjustable)
- 6 ft. Fuel Hose, 1/4"
- Qty. 6, 1/4" clamps
- 30 A Relay, 12 VDC
- Add-A-Circuit ATO (ATM available)
- Qty. 2 Inline Fuses, 30A
- Qty. 2 Holding Clamps, Stainless Steel
- Qty. 4 Relay connectors
- Qty. 2 O-ring Power Connectors
- See the Alexis HHO Cell webpage for more information on how it makes hydroxy gas
- Refill tank sold separately (now available)
- Fittings are high-temperature TeflonŽ
- Formerly the 1250 model
- Scroll down to add to your shopping cart.
*lph means Litres Per Hour. Divide this number by 60 to get the output in Liters Per Minute.
**For an explanation of the VMU Series 2 Options, please see the VMU Series 2 Product Page.
Where do you put a Hydroxy Cell?
***Many vehicles, whether they are big rigs or automobiles, have room between the radiator and the grille for mounting the bubbler/accumulator and the HHO cell(s). The Alexis kit components are
made 2.75 inches square by 10 inches tall to accomodate this.
Billy Newsom has written an article about How Hydrogen Helps and lean operation that can explain how an HHO Kit can improve fuel mileage when used properly.
You may order this HHO Kit without the VMU. See options below.
Photos of each component: Alexis Cell, Bubbler, VMU display, and VMU module
 |
