VMU and Power Box USB Adapter
The VMUUSBC1 cable allows you to update the firmware on the VMU S1 unit, and converts the VMU S2/OBD2 to a fully featured PC-Based diagnostic scanner.
This special USB cable manages the USB signal to TTL logic level conversion and connects to the back of the VMU Series 1, VMU Series 2, and smart power boxes made by HTC. Dealers will need to have one of these cables for performing diagnostics, updates, and troubleshooting HTC products.
- Update the firmware on the
VMU Series 1
- Connect the
VMU Series 2 to a laptop
- Connect a smart power box to a laptop
- Compatible with the
Power Box Version 3 (black)
- Supports JTAG
- Software driver* is included in Windows
- Free software** can be used by Microsoft*** or a third party
- Supports OBD-II to ELM327 software packages whern
used with the VMU Series 2
- Supports autonomous power box setup
*If not available on your Windows operating system, you can
download the USB cable driver. Supported: Windows 2000, XP, Server 2003, Vista, Server 2008 (x86 and x64)
**For
Windows XP and prior versions of Windows, you can use HyperTerminal, included
with the operating system. For Vista, you will probably need to find a terminal
program such as PuTTY that works
over a serial
port.
***Do you have
HyperTerminal installed? Try it and see. Click Start,
Run, and type hypertrm into the box that appears. If
present, it may ask you to choose your default telnet program or set up your
dialing locations. Most of this has nothing to do with a terminal window,
but it will eventually get you to the program. It will then try to
get you to setup a name and icon for the connection before you get to
choose any program options. You will enjoy the beautiful icons and choices which
haven't changed since 1994. Here are some tips on using the program: Microsoft
article, ModemSite, and Dialogic.
Those last 2 have a good overview of what you may see on your
screen.  |
