Power Box Module Version 2 (Red) - Slave Powerbox

So have you outgrown your single HHO cell, and now you need a second Hydroxy Cell? If so, you also need a Slave module to control it. The way the slave works is that your existing VMU can control up to three power boxes. The first must be a Master power box. The second and third powerbox must be a slave module. When you buy the slave module, you will also get a number of parts and supplies to hook it up to your Hydroxy Cell.

Quantities Limited, Please contact us for availability

• 30 A continuous (120 A surge)
• 4 x MOSFET Pulse Width Modulator (PWM)
• Qty. 1 Adapter cable to connect slave to the master
• Qty. 1 Relay
• Qty. 2 Fuse
• Qty. 2 Inline fuse holder
• Qty. 1 Power wire to Cell
• Qty. 1 Power wire to Relay and ground
• Miscellaneous connectors
• 0 Oxygen Sensor Circuits (EFIE)**
• No MAP/MAF Sensor management (Voltage/Resistance)**
• Master module is sold separately

NOTE: This powerbox must be driven by either the VMU Series 1 or VMU Series 2. It can only be used in conjunction with an exiting master powerbox and the VMU which controls it. It cannot be used on its own.

**This feature is performed by the Master module only.